Benco B7
B7 is our most aggressive wood stripper. Widely used in the furniture restoration industry, B7 is typically applied with the Benco Flow-on System or by dipping. B7 will remove multiple layers of stubborn hard coatings quickly and easily. Little to no scrubbing is needed except in small crevices where a brass brush is sufficient to lift out debris. B7 may darken some light colored woods which can be lightened with an oxalic rinse after stripping.
Liquid stripper, non-flammable, water rinsable.
Rapidly strips shellacs, varnishes, lacquers, polyurethanes, enamels, latex, acrylics and precatalyzed lacquers. Works great on painted surfaces.
Most aggressive caustic activated stripper.Note: May darken wood in some cases. Rinse with an oxalic wash.
SPECIFICATION
Specific Gravity—1.195 (10 lbs./gal)
Percent Volatile—>95%
VOC Content—180 grams/liter (1.5lbs./gal)
Boiling Point—104 degrees F
Freeze Point—Less than -40 F
Flash Point—N / A
CONTAINERS
Available in 5, 30 and 55 gallon drums.
SHIPPING
Products are shipped by common carrier. Flat rate shipping minimums for 30 gallons or more. Additional fees will apply airports, residential, limited, etc.
Smaller orders are shipped by Federal Express ground only and/or the United States Postal Service. These orders will be prepaid only.
International shipments require special handling. Call for assistance.
Notice: Methylene Chloride based products are for industrial use only. Use only in well-ventilated areas with proper protective equipment.