Benco B15 -
B15 is our most aggressive semi-paste stripper and is comperable to B17 but in a semi-paste form for use where objects are too large to submerge into a tank. Use on large heavy industrial equipment stripping, large powder coated, or epoxied appliances, and other field-oriented applications where you must bring the stripping formulation to the item. Also frequently used as an airplane or aircraft stripper where speed of removal is of primary importance.
Semi-paste stripper for use on vertical surfaces and items too large for a dip tank system,
non-flammable, water rinse.Extremely aggressive stripping action on all coatings.
Effective on powder coat polyesters and nylons, catalyzed finishes, epoxies, electroplate as well as conventional paints.
Not for use on zinc or magnesium surfaces.
Use B12 for airplanes that have magnesium parts.
Apply by brush or roller. Can be sprayed with a high pressure stainless steel spray system.
SPECIFICATION
pecific Gravity—1.195 (9.97 lbs. / gal)
Percent Volatile—>95%
VOC Content—191 grams/liter (1.59lbs./gal)
Boiling Point—104 degrees F
Freeze Point—Less than -40 F
Flash Point—N / A
CONTAINERS
Available in 5 and 55 gallon drums.
SHIPPING
Products are shipped by common carrier. Flat rate shipping minimums are avialable for 30 gallons or more. Additional fees will apply for airports, residential, limited access areas, etc.
Smaller orders are shipped by Federal Express ground only and/or the United States Postal Service. These orders will be prepaid only.
International shipments require special handling. Call for assistance.
Notice: Methylene Chloride based products are for industrial use only. Use only in well-ventilated areas with proper protective equipment.