Benco Sales > Wood Strippers > Liquid Wood Strippers

Benco liquid strippers are formulated with the highest quality solvents, surfactants, and additives. The liquid strippers are very thin and penetrate rapidly through finishes and into crevices and corners. They contain surfactants and other additives that extend the wet life and enable clean and thorough rinsing with water. Our liquid strippers are developed for use in our Flow-on system.

 

Safety gear and proper ventilation is imperative when using any Benco stripper. Please see Tips—Procedures & Best Practices before using.

More Info

Our most aggressive wood stripper. Removes multiple layers of stubborn hard coatings quickly and easily. May darken some woods. Use an oxalic rinse for lightening wood after stripping.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B7

  • Liquid stripper, non-flammable, water rinsable.
  • Rapidly strips shellacs, varnishes, lacquers, polyurethanes, enamels, latex, acrylics and precatalyzed lacquers. Works great on painted surfaces.
  • Most aggressive caustic activated stripper.Note: May darken wood in some cases. Rinse with an oxalic wash.

SPECIFICATION

  • Specific Gravity—1.195 (10 lbs./gal)
  • Percent Volatile>95%
  • VOC Content—180 grams/liter      (1.5lbs./gal)
  • Boiling Point—104 degrees F
  • Freeze Point—Less than -40 F
  • Flash Point—N / A

CONTAINERS

Available in 5, 30 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

More Info

F14 is our happy medium between B7 and B2 for stripping speed and aggressive cutting. A Besway product that we have kept around in the original formula for customers who have relied on it as their “go-to” universal wood stripper.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Besway F14 is a liquid, non-flammable, neutral pH remover capable of stripping most paints and finishes. F14 will rapidly strip shellacs, varnishes, lacquers, polyurethanes, enamels, latex, and acrylics. F14 will not darken most wood surfaces from stripping, yet it will remove most stains. F14 is formulated with the highest quality virgin solvents, surfactants, and additives.

  • Liquid stripper, non-flammable, water rinsable.
  • Strips paint, lacquers, and polyurethanes.
  • Caustic activated stripper.
    Note: May darken some woods. Rinse with an oxalic wash.

 

SPECIFICATION

  • Specific Gravity—1.195 (10 lbs./gal)
  • Percent Volatile>95%
  • VOC Content—180 grams/liter      (1.5lbs./gal)
  • Boiling Point—104 degrees F
  • Freeze Point—Less than -40 F
  • Flash Point—N / A

CONTAINERS

Available in 5, 30 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

More Info

B2 is a popular fast acting stripper that doesn’t darken wood and is perfect for removing clear finishes. It is a favorite of antique refinishers and those with more delicate jobs.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B2

  • Liquid stripper, non-flammable, water rinsable.

  • Capable of stripping most paints and rapidly strips shellacs, varnishes, lacquers, polyurethanes, enamels, latex, and acrylics.

  • Will not darken wood surfaces from stripping, yet it will remove most stains.

SPECIFICATION

  • Specific Gravity1.19 (9.91 lbs. / gal)
  • Percent Volatile— >95%
  • VOC Content— 111 grams/liter      (0.925lbs./gal)
  • Boiling Point— 104 degrees F
  • Freeze Point— Less than -40 F
  • Flash Point— N / A

CONTAINERS

Available in 5, 30 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

More Info

M36 is an original Besway product that we have continued to manufacture for loyal customers. It’s comparable to B2 in formula and efficiency.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Besway M36

  • Liquid stripper, non-flammable, water rinsable.
  • Capable of stripping most paints and rapidly strips shellacs, varnishes, lacquers, polyurethanes, enamels, latex and acrylics.
  • Will not darken wood surfaces from stripping, yet it will remove most stains.

SPECIFICATION

  • Specific Gravity1.19 (9.91 lbs. / gal)
  • Percent Volatile— >95%
  • VOC Content— 111 grams/liter      (0.925lbs./gal)
  • Boiling Point— 104 degrees F
  • Freeze Point— Less than -40 F
  • Flash Point— N / A

CONTAINERS

Available in 5, 30 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

More Info

For those not wanting to use a water rinse on their projects B1 is rinsed off with denatured alcohol. Most often used for veneers that may separate from contact with water.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B1

  • Liquid stripper, flammable, water or solvent rinsable.
  • Strips shellacs, varnishes, lacquers, polyurethanes and enamels.
  • Rinse with water or solvents

SPECIFICATION

  • Specific Gravity0.96  (7.99 lbs. / gal)
  • Percent Volatile— >95%
  • VOC Content— 349 grams/liter      (2.91 lbs./gal)
  • Boiling Point— 104 degrees F
  • Freeze Point— Less than -40 F
  • Flash Point— 15 degrees F

CONTAINERS

Available in 5, 30 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

More Info

CS18 is an original Besway product that we have continued to manufacture for loyal customers. Use where economy is of primary concern. Rinsable with either denatured alcohol or water.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Besway CS18 

  • Liquid stripper, flammable.
  • Strips shellacs, varnishes, lacquers, polyurethanes and enamels.

SPECIFICATION

  • Methylene Chloride Content: 75-80% by weight
  • Specific Gravity: 1.195 (10 lbs./gal.)
  • Percent Volatile: >95%
  • VOC Content: 180 grams/liter (1.5 lbs./gal.)
  • Boiling Point (Initial): 104 degrees F
  • Freezing Point: Less than -40 F
  • Flash Point: N/A
  • Shelf Life: Minimum 1 year, unopened, stored at less than 75 F

CONTAINERS

Available in 5, 30 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

More Info

B20 is our mildest stripper and is an excellent choice for all-around cleaning of fine finishes. Often used to strip Brass or Copper pieces.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B20

  • Liquid stripper, MEK/Acetone, flammable.
  • Capable of stripping many finishes.
  • Strips shellacs, varnishes, lacquers and polyurethanes.
  • Apply by pouring or flowing over surface or by immersion.

SPECIFICATION

  • Specific Gravity0.83 (6.92 lbs. / gal)
  • Percent Volatile—>95%
  • VOC Content—550 grams/liter      (5.59lbs./gal)
  • Boiling Point—131 degrees F
  • Freeze Point—Less than -0 F
  • Flash Point—15 degrees F

CONTAINERS

Available in 5, 30 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

More Info

B94 is the perfect stripper for those removing finishes from both wood and metal. It strips relatively quickly and is the best choice for those who cannot use a methylene chloride based product due to state regulations or environment.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B94

  • Liquid stripper
  • Low evaporation rate.
  • For use on conventional paints, polyurethanes and epoxies.
  • Appropriate for wood and metal.
  • Safety gear and proper ventilation necessary while using this product.

SPECIFICATION

  • Specific Gravity1.03  (8.66 lbs. / gal)
  • Percent Volatile—>95%
  • VOC Content—15 grams/liter
  • Vapor Pressure—.1mm Hg   
  • Boiling Point—219 degrees F
  • Freeze Point—Less than -30 F
  • Flash Point—>200 degrees F

CONTAINERS

Available in 5, 30 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

Notice: Methylene Chloride based products are for industrial use only. Use only in well ventilated area with proper protective equipment.

More Info
  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

Benco B23

  • Liquid stripper, NMP-based, water rinsable, non-flammable.
  • Capable of removing many paints and finishes.
  • Strips shellacs, varnishes, lacquers, polyurethanes, enamels and acrylics.
  • Has a long wet life.
  • Apply by brush or pump with flow on system.

SPECIFICATION

  • Specific Gravity1.01  (8.41 lbs. / gal)
  • Percent Volatile—>95%
  • VOC Content—536 grams/liter    
  • Boiling Point—329 degrees F
  • Freeze Point—Less than -30 F
  • Flash Point—140 degrees F

CONTAINERS

Available in 5, 30 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

BSI Companies | Benco Sales, Inc. | Besway Systems
123 Stout Drive, Crossville, TN 38555