Customer Feedback

Some finishes dissolve, others just lift off. Great stuff! Jeff Funkhouse, (Owner) Function Performance, Cornelius, NC

Introducing our most powerful non-MCL stripper. Strong enough to wear the B17 badge—the e stands for Eco-friendly and Economical. Made in the USA, B17e works best heated to 145-180 degrees, leaves no residue and is non NMP*.  Use B17e to strip tough OEM finishes on anything you would normally use B17 for but may be prohibited due to individual state restrictions on methylene chloride. B17e is the fastest stripper for automotive wheels if you want a non-methylene chloride stripper.

Submersion in B17e will remove epoxies, polyurethanes, polyester coatings, electrocoat coatings, and non-catalyzed paints and coatings. B17e contains ingredients that have very low evaporation rates that provide formulation stability, allowing the product to be used extensively without performance deterioration. B17e is formulated with the highest quality virgin solvents, surfactants, and additives.

Call your Benco Customer Service Representative for details and pricing.

  • DESCRIPTION
  • SPECIFICATION
  • CONTAINERS

DESCRIPTION

  • Non-corrosive to steel, aluminum or magnesium parts
  • Very thin liquid penetrates rapidly through finishes and into crevices
  • Heat to between 145-180 for optimal results
  • Average immersion time—20-50 minutes. Keep submerged until all coatings are removed
  • Rinse with water for complete removal
  • Simply replenish as used
  • Proudly Made in America by American workers

SPECIFICATION

  • Specific Gravity—1.03
  • Percent Volatile—>100%
  • VOC Content—LVP exempt
  • Vapor Pressure— < 2mm Hg
  • Vapor Density— > 1.0
  • Boiling Point—189C
  • Freeze Point—Less than -40 F
  • Flash Point—93C
  • pH—10-12
  • Shelf Life—3 years when stored inside

CONTAINERS

Available in 30 and 55 gallon drums.

Benco trucks service more than 95% of cities in the 48 contiguous states. See our Truck Schedule. All items are delivered on our regularly scheduled Benco trucks on orders of 30 gallons or more of strippers and/or finishes. Freight charges apply. Restrictions on semi-truck access should be discussed with our customer service department to reach a convenient delivery. Orders that need to be expedited, that cannot wait for the Benco truck schedule, can be shipped by common carrier. Common carrier rates will apply. These shipments will be prepaid only.

Smaller orders are shipped Federal Express ground only and/or United States Postal Service. These orders will be prepaid only.

International shipments require special handling. Call for assistance.

*NMP is an active ingredient found in most non-methylene-chloride strippers and is known to cause birth defects.
B17e does NOT use NMP and is methylene-chloride free.

Notice: During excessive summer heat we will not be able to ship 5 gallon pails via ground deliveries or dums via common carrier deliveries. Please contact Benco for arranging your shipment on a Benco refrigerated truck.

BSI Companies | Benco Sales, Inc. | Besway Systems
123 Stout Drive, Crossville, TN 38555